Sunny MCU and Electronics

วันจันทร์ที่ 13 ตุลาคม พ.ศ. 2557

ASUS RT-N12 C1

อุปกรณ์ตัวนี้เป็นไวเลสเราเตอร์ 300Mbps มีเสา 2 เสา LAN 4 พอร์ต และ WAN 4 พอร์ต

ตัวเครื่อง

ด้านหลังมีพอร์ต WAN, LAN, ฐานเสาอากาศ, ช่องเสียบไฟ DC 9-12v , Switch เลือกโหมดการทำงานและปุ่ม WPS, Reset

ด้านหลัง

บอร์ดวงจรหลักของเครื่องมีไอซีหลักๆ คือ

บอร์ดวงจร

Broadcom BCM5357C0 -> Integrated IEEE 802.11n radio, media access controller (MAC), baseband, CPU, memory controller and 5-port Fast Ethernet switch

Broadcom BCM5357C0

Winbond W9425G6JH -> (32MB) 4M X 4 Bank X 16bits DDR SDRAM

Winbond W9425G6JH

MXIC MX25L6406E -> 64M-BIT [x 1 / x 2] CMOS SERIAL FLASH

MXIC MX25L6406E

LV1482S -> 4.2V to 18V, 2A 1ch Synchronous Buck Converter integrated FET

LV1482S

B1188 -> MEDIUM POWER LOW VOLTAGE TRANSISTOR

B1188

วงจร RF

ลายวงจรของ USB Host ที่ไม่ได้ต่ออุปกรณ์

USB

พอร์ต Serial ความเร็ว 115200

Serial

พอร์ต JTAG 14 ขา

JTAG

ด้านหลังบอร์ด

Boot Message

Decompressing...done

CFE version 5.100.138.9 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)

Build Date: ? 10? 26 18:36:58 CST 2011 (root@myvm1)

Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena

Init Devs.

Boot partition size = 131072(0x20000)

Found an ST compatible serial flash with 128 64KB blocks; total size 8MB

et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.9

CPU type 0x19749: 300MHz

Tot mem: 32768 KBytes

CFE mem: 0x80700000 - 0x80799720 (628512)

Data: 0x8072F560 - 0x80732790 (12848)

BSS: 0x80732790 - 0x80733720 (3984)

Heap: 0x80733720 - 0x80797720 (409600)

Stack: 0x80797720 - 0x80799720 (8192)

Text: 0x80700000 - 0x8072F558 (193880)

Device eth0: hwaddr XX-XX-XX-XX-XX-XX, ipaddr 192.168.1.1, mask 255.255.255.0

gateway not set, nameserver not set

end of nvram_rescuegpio_init

Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)

Loading: CFE works as TFTP Server.

Failed.

Could not load :: Timeout occured

Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)

Loading: .. 5100 bytes read

Entry at 0x80001000

Closing network.

Starting program at 0x80001000

Linux version 2.6.22.19 (root@asus) (gcc version 4.2.4) #1 Sun Sep 22 16:08:03 CST 2013

CPU revision is: 00019749

Found an ST compatible serial flash with 128 64KB blocks; total size 8MB

Determined physical RAM map:

memory: 02000000 @ 00000000 (usable)

Built 1 zonelists. Total pages: 8128

Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200

Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.

Primary data cache 32kB, 4-way, linesize 32 bytes.

Synthesized TLB refill handler (20 instructions).

Synthesized TLB load handler fastpath (32 instructions).

Synthesized TLB store handler fastpath (32 instructions).

Synthesized TLB modify handler fastpath (31 instructions).

PID hash table entries: 128 (order: 7, 512 bytes)

CPU: BCM53572 rev 1 pkg 8 at 300 MHz

Using 150.000 MHz high precision timer.

console [ttyS0] enabled

Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)

Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)

Memory: 28932k/32768k available (2446k kernel code, 3836k reserved, 493k data, 160k init, 0k highmem)

Mount-cache hash table entries: 512

NET: Registered protocol family 16

PCI: no core

PCI: no core

PCI: Fixing up bus 0

NET: Registered protocol family 2

Time: MIPS clocksource has been installed.

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 1024 (order: 1, 8192 bytes)

TCP bind hash table entries: 1024 (order: 0, 4096 bytes)

TCP: Hash tables configured (established 1024 bind 1024)

TCP reno registered

squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher

io scheduler noop registered (default)

HDLC line discipline: version $Revision: 4.8 $, maxframe=4096

N_HDLC line discipline registered.

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled

serial8250: ttyS0 at MMIO 0xb8000300 (irq = 8) is a 16550A

PPP generic driver version 2.4.2

MPPE/MPPC encryption/compression module registered

NET: Registered protocol family 24

PPPoL2TP kernel driver, V0.18.3

PPTP driver version 0.8.5

pflash: found no supported devices

Creating 5 MTD partitions on "sflash":

0x00000000-0x00020000 : "pmon"

0x00020000-0x007f0000 : "linux"

0x0014855c-0x005e0000 : "rootfs"

0x007f0000-0x00800000 : "nvram"

0x00770000-0x007f0000 : "jffs2"

dev_nvram_init: _nvram_init

_nvram_init: allocat header: 2151546880, size= 32768

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

u32 classifier

OLD policer on

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (512 buckets, 4096 max)

ipt_time loading

ip_tables: (C) 2000-2006 Netfilter Core Team

net/ipv4/netfilter/tomato_ct.c [Sep 22 2013 16:07:25]

NET: Registered protocol family 1

NET: Registered protocol family 10

ip6_tables: (C) 2000-2006 Netfilter Core Team

NET: Registered protocol family 17

802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>

All bugs added by David S. Miller <davem@redhat.com>

VFS: Mounted root (squashfs filesystem) readonly.

Freeing unused kernel memory: 160k freed

Warning: unable to open an initial console.

set_action 0

[1 init:init_nvram +4] init_nvram for 12

RT-N12C1: swmode: router repeater apnum_of_mssid_support(0x007f): [mssid] support [3] mssid

RT-N12C1: swmode: routerctf: module license 'Proprietary' taints kernel.

et_module_init: passivemode set to 0x0

eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.110.27.20012

hotplug net INTERFACE=eth0 ACTION=add

wl_module_init: passivemode set to 0x0

eth1: Broadcom BCM4329 802.11 Wireless Controller 5.110.27.20012

hotplug net INTERFACE=eth1 ACTION=add

[1 init:init_main +8] main loop signal/state=17

start_logger:

Algorithmics/MIPS FPU Emulator v1.5

/ # _ifconfig: name=eth0 flags=1043 IFUP addr=(null) netmask=(null)

hotplug net INTERFACE=vlan1 ACTION=add

hotplug net INTERFACE=vlan0 ACTION=add

start_lan 1069

update_lan_state(lan_, 0, 0)

start_lan: setting up the bridge br0

hotplug net INTERFACE=br0 ACTION=add

vlan0: cmd=14: Operation not supported

_ifconfig: name=vlan0 flags=1043 IFUP addr=(null) netmask=(null)

start_lan: setting MAC of br0 bridge to XX:XX:XX:XX:XX:XX

_ifconfig: name=eth1 flags=1043 IFUP addr=(null) netmask=(null)

generate_wl_para(0x0a91): unit 0 subunit -1

num_of_mssid_support(0x007f): [mssid] support [3] mssid

generate_wl_para(0x0c99): bw: 1

generate_wl_para(0x0c9e): channel: 6

generate_wl_para(0x0c9f): nbw_cap: 1

generate_wl_para(0x0ca0): nctrlsb: lower

generate_wl_para(0x0ca2): obss_coex: 1

generate_wl_para(0x0a91): unit 0 subunit 1

generate_wl_para(0x0a91): unit 0 subunit 2

generate_wl_para(0x0a91): unit 0 subunit 3

wlconf(0x014f): unit: 0, txpower: 80

_ifconfig: name=br0 flags=1043 IFUP addr=192.168.1.1 netmask=255.255.255.0

_ifconfig: name=lo flags=1043 IFUP addr=127.0.0.1 netmask=255.0.0.0

route_manip: cmd=ADD name=lo addr=127.0.0.0 netmask=255.0.0.0 gateway=0.0.0.0 metric=0

update_lan_state(lan_, 2, 0)

stop_nat_rules: apply the redirect_rules!

start_lan 1448

start_services 2907

# wanduck: Got LAN(-1) information:

# Enable direct rule

[1 init:start_dnsmasq +11] begin

[1 init:start_dnsmasq +12] end

start_lan_port(0) 1

decomp: fname=/var/lib/misc/rstats-speed.gz

TZ watchdog

[1 init:start_upnp +12] config 5

start_pptpd: getpid= 1

decomp: gzip -dc /var/lib/misc/rstats-speed.gz > /var/tmp/rstats-uncomp != 0

load: speed_count = 0

load: read source= save_path=

load_history: fname=/var/lib/misc/rstats-history.gz

decomp: fname=/var/lib/misc/rstats-history.gz

decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0

decomp: fname=/var/lib/misc/rstats-history.gz

decomp: gzip -dc /var/lib/misc/rstats-history.gz > /var/tmp/rstats-uncomp != 0

load_history: load failed

sh: can't open '/opt/etc/init.d/S50aicloud'

start_wan_if(0)

update_wan_state(wan0_, 0, 0)

convert_wan_nvram(wan0_)

start_auth:: done

udhcpc_wan:: deconfig

update_wan_state(wan0_, 1, 0)

start_wan_if(): End.

vlan0: cmd=14: Operation not supported

eth1: WLC_GET_VAR(psta_if): Operation not supported

_ifconfig: name=eth0 flags=1043 IFUP addr=0.0.0.0 netmask=(null)

wan_down(eth0)

wan_down(eth0): .

stop_auth:: done

route_manip: cmd=DEL name=eth0 addr=0.0.0.0 netmask=0.0.0.0 gateway=(null) metric=0

update_wan_state(wan0_, 3, 0)

update_wan_state(wan0_, 4, 3)

udhcpc:: deconfig done

[1 init:init_main +13] main loop signal/state=14

udhcpc_wan:: bound

_ifconfig: name=eth0 flags=1043 IFUP addr=0.0.0.0 netmask=(null)

_ifconfig: name=eth0 flags=1043 IFUP addr=192.168.111.195 netmask=255.255.255.0

wan_up(eth0)

route_manip: cmd=ADD name=eth0 addr=192.168.111.1 netmask=255.255.255.255 gateway=(null) metric=0

update_wan_state(wan0_, 2, 0)

writting prerouting eth0 192.168.111.195 eth0 0.0.0.0 br0 192.168.1.1

wanport_status(0) 16

start_nat_rules: apply the nat_rules(/tmp/nat_rules_eth0_eth0)!

[218 udhcpc:filter_setting +13] writing vts_enable_x

[218 udhcpc:filter_setting +13] write porttrigger

[218 udhcpc:filter_setting +13] write wl filter

[218 udhcpc:filter_setting +13] write url filter

nf_conntrack_rtsp v0.6.21 loading

nf_nat_rtsp v0.6.21 loading

start_auth:: done

udhcpc 218:notify_rc: stop_upnp

[1 init:init_main +14] main loop signal/state=16

cmd[0]=stop_upnp

[1 init:handle_notifications +14] running: 1 upnp

killall_tk: waiting name=miniupnpd n=9

handle_notifications() end

[1 init:init_main +14] main loop signal/state=14

udhcpc 218:notify_rc: start_upnp

[1 init:init_main +14] main loop signal/state=16

cmd[0]=start_upnp

[1 init:handle_notifications +14] running: 2 upnp

[1 init:start_upnp +14] config 5

handle_notifications() end

udhcpc 218:notify_rc: stop_ntpc

[1 init:init_main +14] main loop signal/state=16

cmd[0]=stop_ntpc

[1 init:handle_notifications +14] running: 1 ntpc

handle_notifications() end

udhcpc 218:notify_rc: start_ntpc

[1 init:init_main +14] main loop signal/state=16

cmd[0]=start_ntpc

[1 init:handle_notifications +14] running: 2 ntpc

handle_notifications() end

wan_up(eth0): done.

udhcpc:: bound done

[1 init:init_main +14] main loop signal/state=14

starting ntp...

[1 init:init_main +14] main loop signal/state=14

[1 init:init_main +14] main loop signal/state=14

# Disable direct rule(D2C)

ntp 267:notify_rc: restart_upnp

[1 init:init_main +45] main loop signal/state=16

cmd[0]=restart_upnp

[1 init:handle_notifications +45] running: 3 upnp

killall_tk: waiting name=miniupnpd n=9

[1 init:start_upnp +45] config 5

handle_notifications() end

[1 init:init_main +45] main loop signal/state=14

[1 init:init_main +45] main loop signal/state=14

cpuinfo

system type : Broadcom BCM53572 chip rev 1 pkg 8

processor : 0

cpu model : MIPS 74K V4.9

BogoMIPS : 149.91

wait instruction : no

microsecond timers : yes

tlb_entries : 32

extra interrupt vector : no

hardware watchpoint : yes

ASEs implemented : mips16 dsp

shadow register sets : 1

VCED exceptions : not available

VCEI exceptions : not available

unaligned_instructions : 0

dcache hits : 2147483648

dcache misses : 0

icache hits : 2147483648

icache misses : 0

instructions : 2147483648

ifconfig

br0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX

inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:7794 errors:0 dropped:0 overruns:0 frame:0

TX packets:3897 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:714152 (697.4 KiB) TX bytes:755769 (738.0 KiB)

eth0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX

inet addr:192.168.111.195 Bcast:192.168.111.255 Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:246512 errors:0 dropped:0 overruns:0 frame:0

TX packets:205609 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:264711464 (252.4 MiB) TX bytes:27310290 (26.0 MiB)

Interrupt:4 Base address:0x2000

eth1 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:175216 errors:0 dropped:0 overruns:0 frame:95508

TX packets:210102 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:11989776 (11.4 MiB) TX bytes:259307866 (247.2 MiB)

Interrupt:3 Base address:0x1000

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1

RX packets:1390 errors:0 dropped:0 overruns:0 frame:0

TX packets:1390 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:288726 (281.9 KiB) TX bytes:288726 (281.9 KiB)

vlan0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:5544 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 B) TX bytes:651432 (636.1 KiB)

mtd

dev: size erasesize name

mtd0: 00020000 00010000 "pmon"

mtd1: 007d0000 00010000 "linux"

mtd2: 00497aa4 00010000 "rootfs"

mtd3: 00010000 00010000 "nvram"

mtd4: 00080000 00010000 "jffs2"

ไฟล์สำรอง mtd

MTD command in ASUS RT-N12 Router

/ # nvram

usage: nvram [get name] [set name=value] [unset name] [show] [save file] [restore file]

/ # mtd-erase
Usage: mtd-erase -d part
/ # mtd-unlock
Usage: mtd-unlock -d part
/ # mtd-write
Usage: mtd-write -i file -d part

วันเสาร์ที่ 11 ตุลาคม พ.ศ. 2557

Cisco RV042 v3

อุปกรณ์ตัวนี้เป็น Dual WAN VPN Router มี 2 พอร์ต WAN และ 4 พอร์ต LAN สเปคคร่าวๆ คือ CPU Cavium CN5010, DDR2 128 MB, Parallel Flash 32 MB

ตัวเครื่องภายนอก

ไอซีหลักๆ ในบอร์ดคือ

บอร์ดหลัก

Samsung K4T51163 -> 512Mb(64MB) I-die DDR2 SDRAM

Samsung K4T51163

Intel 28F256 -> Intel StrataFlash® Memory (J3) 256-Mbit (x8/x16)

Intel JS28F256

Realtek RTL8309G -> 9 Ports 10/100 Switch

Realtek RTL8309G

40SS1041AX HF -> 10/100 BASE QUAD PORT PULSE TRANSFORMERS

40SS104AX HF

TS8121CX HF -> 10/100 BASE-T ETHERNET ISOLATION TRANSFORMER

TS8121CX HF

ภาคจ่ายไฟ 1.8v, 1.05v, 3.3v ใช้ไอซีเดียวกันคือ MP1482DS

ภาคจ่ายไฟ

MP1482DS -> 2A, 18V Synchronous Rectified Step-Down Converter

MP1482DS

DH=V0V -> Regulator 2.5v

DH=VOV

ใต้บอร์ดมีไอซี FPGA กับแรม 64MB อีก 1 ตัว

ด้านใต้บอร์ด

Lattice machXO LCMXO256C -> FPGA

Lattice LCMXO256C

Samsung K4T51163 -> 512Mb(64MB) I-die DDR2 SDRAM

Samsung K4T51163

วันพฤหัสบดีที่ 2 ตุลาคม พ.ศ. 2557

Buffalo WHR-HP-G300N

เราเตอร์ตัวนี้มี LAN 4 พอร์ต WAN 1 พอร์ต Wireless b/g/n 300M รองรับ DD-WRT และ OpenWrt

ตัวเครื่อง

แกะดูในเครื่องมีสเปคคร่าวๆ คือ CPU AR7240, 4 MB SPI Flash, 32 MB DDR SDRAM

บอร์ดเราเตอร์

ไอซีหลักๆ ได้แก่

Atheros AR7240 -> Wireless Network Processor

Atheros AR7240

MIRA P3S56D40ETP -> 256Mb Double Data Rate Synchronous DRAM

MIRA P3S56D40ETP

MXIC MX25L3205DMI -> 32M-BIT [x 1 / x 2] CMOS SERIAL FLASH

MXIC MX25L3205DMI

Atheros AR9283 -> PCIe bgn 2x2:2 draft-n Wireless chipsets

Atheros AR9283

Microchip SST12LP15A -> 2.4 GHz High-Power and High-Gain Power Amplifier

Microchip SST12LP15A

APW7145 -> 3A, 12V, Synchronous-Rectified Buck Converter

APW7145

C8-BM -> 1.2v Regulator

C8-BM

Regulator, Jtag, Serial 115200

Port & Power

ด้างล่าง

ไอซีจ่ายไฟ 0.4v ทั้ง 2 ตัว

Regulator 0.4v

Boot Message

BUFFALO U-BOOT Ver 1.00

AP93 (ar7240) U-boot

sri

====================================================================== ===============================================================

TAP CALC (read_cnt=512)

----+----------------------------------------------------------------- ---------------------------------------------------------------

TAP | 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

----+----------------------------------------------------------------- ---------------------------------------------------------------

FAIL| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ----+----------------------------------------------------------------- ---------------------------------------------------------------

SELECT tap0=7 / tap1=8

#### ddr registers

B8000000 = C7BC8CD0

B8000004 = 9DD0E6A8

B8000008 = 00000033

B800000C = 00000002

B8000010 = 00000000

B8000014 = 00004AF0

B8000018 = 000000FF

B800001C = 00000007

B8000020 = 00000008

B8000024 = 00000005

B8000028 = 00000005

32 MB

Memory Test (address line)

Memory Test start(0xA0000000) end(0xA2000000) size(33554432)

Data line test start:0xa0000000 pattern 0x00000001 0x00000003 0x000000 07 0x0000000F 0x00000005 0x00000015 0x00000055 0xAAAAAAAA

Address line test start:0xa0000000 len:0x2000000 pattern 0xAAAAAAAA 0x 55555555

Fill test patnum:5

fill Pattern 5555AAAA Writing... Reading...

fill Pattern AAAA5555 Writing... Reading...

fill Pattern 0000FFFF Writing... Reading...

fill Pattern FFFF0000 Writing... Reading...

fill Pattern AAAAAAAA Writing... Reading...

Top of RAM usable for U-Boot at: 82000000

Reserving 294k for U-Boot at: 81fb4000

Reserving 136k for malloc() at: 81f92000

Reserving 44 Bytes for Board Info at: 81f91fd4

Reserving 36 Bytes for Global Data at: 81f91fb0

Reserving 128k for boot params() at: 81f71fb0

Stack Pointer at: 81f71f98

Now running in RAM - U-Boot at: 81fb4000

id read 0x100000ff

flash size 8388608, sector count = 2048

Flash: 8 MB

In: serial

Out: serial

Err: serial

Memory Test

uboot use 81F71FB0 - 82000000

Memory Test start(80000000) end(81F00000) size(01F00000)

Pattern 00000000 Writing... Reading...

Memory Test OK

### buf_ver=[1.00] U-Boot Ver.=[1.00]

### build_date(env)=[Apr 30 2009 - 10:08:46] build_date(bin)=[Apr 30 2 009 - 10:08:46]

ag7240_enet_initialize...

Reading MAC Address from ENV(0x81f922d9)

: cfg1 0xf cfg2 0x7014

eth0: 02:aa:bb:cc:dd:1c

eth0 up

No valid address in Flash. Using fixed address

: cfg1 0xf cfg2 0x7014

eth1: 00:03:7f:09:0b:ad

ATHRS26: resetting s26

ATHRS26: s26 reset done

eth1 up

eth0 02:AA:BB:CC:DD:1C

, eth1 00:03:7F:09:0B:AD

tftp server(receive) go, waiting:4[sec]

Load address: 0x80f00000

TftpServer Timeout;

no file was loaded.

## Booting image at bf040000 ...

Image Name: DD-WRT v24 Linux Kernel Image

Created: 2011-10-31 3:34:56 UTC

Image Type: MIPS Linux Kernel Image (lzma compressed)

Data Size: 856149 Bytes = 836.1 kB

Load Address: 80002000

Entry Point: 801e7310

Verifying Checksum ... OK

Uncompressing Kernel Image ... OK

No initrd

## Transferring control to Linux (at address 801e7310) ...

## Giving linux memsize in bytes, 33554432

Starting kernel ...

[ 0.000000] Linux version 2.6.34.10 (root@dd-wrt) (gcc version 4.5. 4 20110526 (prerelease) (Linaro GCC 4.5-2011.06-0) ) #227 Mon Oct 31 0 4:10:06 CET 2011

[ 0.000000] flash_size passed from bootloader = 8

[ 0.000000] bootconsole [early0] enabled

[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)

Booting AR7240(Python)...

[ 0.000000] Determined physical RAM map:

[ 0.000000] memory: 02000000 @ 00000000 (usable)

[ 0.000000] Zone PFN ranges:

[ 0.000000] Normal 0x00000000 -> 0x00002000

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[1] active PFN ranges

[ 0.000000] 0: 0x00000000 -> 0x00002000

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128

[ 0.000000] Kernel command line: console=ttyS0,115200 root=1f02 roo tfstype=squashfs noinitrd init=/sbin/init

[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)

[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 by tes)

[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 3 2 bytes.

[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, li nesize 32 bytes

[ 0.000000] Writing ErrCtl register=00000000

[ 0.000000] Readback ErrCtl register=00000000

[ 0.000000] Memory: 29712k/32768k available (1965k kernel code, 305 6k reserved, 359k data, 144k init, 0k highmem)

[ 0.000000] NR_IRQS:128

[ 0.000000] Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)

[ 0.240000] Mount-cache hash table entries: 512

[ 0.240000] NET: Registered protocol family 16

[ 0.260000] found calibration data for slot 0 on 0xBF3F1000

[ 0.470000] registering PCI controller with io_map_base unset

[ 0.480000] bio: create slab <bio-0> at 0

[ 0.490000] pci 0000:00:00.0: fixup device configuration

[ 0.490000] bootstrap returns device 168C:2A

[ 0.500000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x100 0ffff 64bit]

[ 0.500000] pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000f fff 64bit] (PCI address [0x10000000-0x1000ffff]

[ 0.510000] PCI: mapping irq 48 to pin1@0000:00:00.0

[ 0.510000] fixup irq: got 48

[ 0.510000] Switching to clocksource MIPS

[ 0.520000] NET: Registered protocol family 2

[ 0.520000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

[ 0.530000] TCP established hash table entries: 1024 (order: 1, 819 2 bytes)

[ 0.540000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes )

[ 0.540000] TCP: Hash tables configured (established 1024 bind 1024 )

[ 0.550000] TCP reno registered

[ 0.550000] UDP hash table entries: 256 (order: 0, 4096 bytes)

[ 0.560000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[ 0.560000] NET: Registered protocol family 1

[ 0.570000] gpio_proc: module loaded and /proc/gpio/ created

[ 0.580000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created

[ 0.580000] init_vdso successfull

[ 0.590000] squashfs: version 3.0 (2006/03/15) Phillip Lougher

[ 0.590000] msgmni has been set to 58

[ 0.600000] io scheduler noop registered

[ 0.600000] io scheduler deadline registered (default)

[ 0.610000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disable d

[ 0.620000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A

[ 0.620000] console [ttyS0] enabled, bootconsole disabled

[ 0.620000] console [ttyS0] enabled, bootconsole disabled

[ 0.630000] guessed flashsize = 4M

[ 0.640000] scanning for root partition

[ 0.640000] uboot detected

[ 0.650000] guessed bootloader size = 40000

[ 0.650000]

[ 0.650000] found squashfs at 112000

[ 0.660000] Creating 8 MTD partitions on "ar7240-nor0":

[ 0.660000] 0x000000000000-0x000000040000 : "RedBoot"

[ 0.670000] 0x000000040000-0x0000003e0000 : "linux"

[ 0.680000] 0x000000112000-0x0000003e0000 : "rootfs"

[ 0.680000] mtd: partition "rootfs" must either start or end on era se block boundary or be smaller than an erase block -- forcing read-on ly

[ 0.690000] mtd: partition "rootfs" set to be root filesystem

[ 0.700000] 0x0000003e0000-0x000000400000 : "ddwrt"

[ 0.710000] 0x0000003e0000-0x0000003f0000 : "nvram"

[ 0.710000] 0x0000003f0000-0x000000400000 : "board_config"

[ 0.720000] 0x000000000000-0x000000400000 : "fullflash"

[ 0.720000] 0x000000000000-0x000000040000 : "fullboot"

[ 0.730000] PPP generic driver version 2.4.2

[ 0.740000] PPP Deflate Compression module registered

[ 0.740000] PPP BSD Compression module registered

[ 0.750000] PPP MPPE Compression module registered

[ 0.750000] NET: Registered protocol family 24

[ 0.760000] PPPoL2TP kernel driver, V1.0

[ 0.760000] IMQ driver loaded successfully.

[ 0.760000] Hooking IMQ before NAT on PREROUTING.

[ 0.770000] Hooking IMQ after NAT on POSTROUTING.

[ 0.770000] tun: Universal TUN/TAP device driver, 1.6

[ 0.780000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[ 0.790000] AG7240: Length per segment 1544

[ 0.790000] AG7240: Max segments per packet 1

[ 0.790000] AG7240: Max tx descriptor count 80

[ 0.800000] AG7240: Max rx descriptor count 252

[ 0.800000] AG7240: fifo cfg 3 01f00140

[ 0.810000] AG7240CHH: Mac address for unit 0

[ 0.810000] AG7240CHH: ff:ff:ff:ff:ff:ff

[ 1.020000] AG7240CHH: Mac address for unit 1

[ 1.020000] AG7240CHH: ff:ff:ff:ff:ff:ff

[ 1.230000] Software Watchdog Timer: 0.07 initialized. soft_noboot= 0 soft_margin=60 sec (nowayout= 0)

[ 1.250000] u32 classifier

[ 1.250000] input device check on

[ 1.260000] Actions configured

[ 1.260000] Netfilter messages via NETLINK v0.30.

[ 1.260000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)

[ 1.270000] CONFIG_NF_CT_ACCT is deprecated and will be removed soo n. Please use

[ 1.280000] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntra ck module option or

[ 1.290000] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

[ 1.290000] nf_conntrack_rtsp v0.6.21 loading

[ 1.300000] nf_nat_rtsp v0.6.21 loading

[ 1.300000] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 1.310000] IPP2P v0.8.2 loading

[ 1.310000] TCP westwood registered

[ 1.310000] TCP hybla registered

[ 1.320000] TCP vegas registered

[ 1.320000] NET: Registered protocol family 17

[ 1.320000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatec h.com>

[ 1.330000] All bugs added by David S. Miller <davem@redhat.com>

[ 1.370000] VFS: Mounted root (squashfs filesystem) readonly on dev ice 31:2.

[ 1.380000] Freeing unused kernel memory: 144k freed

start service

starting Architecture code for whrhpgn

starting hotplug

Jan 1 00:00:03 udevtrigger[233]: parse_config_file: can't open '/etc/ udev/udev.conf' as config file: No such file or directory

done

load ATH Ethernet Driver

configure eth0 to 00:24:a5:b4:c5:a4

configure eth1 to 00:24:a5:b4:c5:a4

[ 4.150000] ag7240_ring_alloc Allocated 1280 at 0x818cb800

[ 4.160000] ag7240_ring_alloc Allocated 4032 at 0x81b3f000

[ 4.160000] Setting PHY...

[ 7.170000] ag7240_ring_alloc Allocated 1280 at 0x81af1000

[ 7.180000] ag7240_ring_alloc Allocated 4032 at 0x81999000

[ 7.180000] ATHRS26: resetting s26

[ 7.290000] ATHRS26: s26 reset done

[ 7.290000] Setting PHY...

load ATH 802.11 a/b/g Driver

load ATH9K 802.11n Driver

[ 8.460000] Compat-wireless backport release: compat-wireless-2011- 09-14-r28245

[ 8.460000] Backport based on wireless-testing.git master-2011-09-1 4

[ 8.710000] cfg80211: Calling CRDA to update world regulatory domai n

[ 8.860000] AG7240: enet unit:1 phy:0 is up...Mii 100Mbps full dupl ex

[ 8.870000] AG7240: done cfg2 0x7215 ifctl 0x0 miictrl

[ 8.890000] cfg80211: World regulatory domain updated:

[ 8.900000] cfg80211: (start_freq - end_freq @ bandwidth), (max _antenna_gain, max_eirp)

[ 8.910000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 8.910000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 8.920000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 8.930000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 8.940000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 9.760000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, ir q=48

[ 9.770000] cfg80211: Calling CRDA for country: US

[ 9.790000] cfg80211: Regulatory domain changed to country: US

[ 9.800000] cfg80211: (start_freq - end_freq @ bandwidth), (max _antenna_gain, max_eirp)

[ 9.800000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)

[ 9.810000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)

[ 9.820000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 9.830000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 9.840000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 9.850000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)

/bin/sh: can't create /proc/sys/net/bridge/bridge-nf-call-arptables: n onexistent directory

/bin/sh: can't create /proc/sys/net/bridge/bridge-nf-call-ip6tables: n onexistent directory

/bin/sh: can't create /proc/sys/net/bridge/bridge-nf-call-iptables: no nexistent directory

ath9k deconfigure_single: phy0 ath0

[ 12.080000] device br0 entered promiscuous mode

[ 12.100000] ag7240_ring_free Freeing at 0x81af1000

[ 12.100000] ag7240_ring_free Freeing at 0x81999000

[ 12.120000] ag7240_ring_alloc Allocated 1280 at 0x81b56000

[ 12.130000] ag7240_ring_alloc Allocated 4032 at 0x81999000

[ 12.140000] Setting PHY...

[ 13.150000] ag7240_ring_free Freeing at 0x81b56000

[ 13.150000] ag7240_ring_free Freeing at 0x81999000

[ 13.170000] ag7240_ring_alloc Allocated 1280 at 0x81a83000

[ 13.180000] ag7240_ring_alloc Allocated 4032 at 0x81999000

[ 13.190000] Setting PHY...

[ 14.200000] device eth1 entered promiscuous mode

[ 14.200000] device br0 left promiscuous mode

[ 14.210000] device br0 entered promiscuous mode

[ 14.220000] device br0 left promiscuous mode

[ 14.230000] device br0 entered promiscuous mode

ath9k deconfigure_single: phy0 ath0

/bin/sh: can't create /proc/sys/dev/wifi0/superchannel: nonexistent di rectory

/bin/sh: can't create /proc/sys/dev/wifi0/regdomain: nonexistent direc tory

/bin/sh: can't create /proc/sys/dev/wifi0/countrycode: nonexistent dir ectory

/bin/sh: can't create /proc/sys/dev/wifi0/outdoor: nonexistent directo ry

/bin/sh: can't create /proc/sys/dev/wifi0/antennagain: nonexistent dir ectory

/bin/sh: can't create /proc/sys/dev/wifi0/antennagainsub: nonexistent directory

/bin/sh: can't create /proc/sys/dev/wifi0/channelbw: nonexistent direc tory

/bin/sh: [ 14.320000] cfg80211: Calling CRDA for country: SG

can't create /proc/sys/dev/wifi0/channelshift: nonexistent directory

[ 14.340000] cfg80211: Regulatory domain changed to country: SG

[ 14.350000] cfg80211: (start_freq - end_freq @ bandwidth), (max _antenna_gain, max_eirp)

[ 14.350000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 14.360000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 14.370000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 14.380000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 14.750000] AG7240: enet unit:1 phy:0 is up...Mii 100Mbps full dupl ex

[ 14.760000] AG7240: done cfg2 0x7215 ifctl 0x0 miictrl

[ 14.770000] br0: port 1(eth1) entering learning state

[ 15.770000] br0: port 1(eth1) entering forwarding state

ath9k configure_single: phy0 ath0

command failed: Invalid argument (-22)

call mac80211autochannel for interface: ath0

freq:2412 qual:66 noise:-94

freq:2417 qual:41 noise:-94

freq:2422 qual:58 noise:-94

freq:2427 qual:61 noise:-94

freq:2432 qual:45 noise:-94

freq:2437 qual:93 noise:-94

freq:2442 qual:45 noise:-94

freq:2447 qual:64 noise:-94

freq:2452 qual:66 noise:-95

freq:2457 qual:45 noise:-94

freq:2462 qual:74 noise:-94

freq:2467 qual:45 noise:-94

freq:2472 qual:64 noise:-94

mac80211autochannel interface: ath0 frequency: 2437

setup ath0 00:24:A5:B4:C5:A4

[ 24.200000] device ath0 entered promiscuous mode

[ 24.210000] br0: port 2(ath0) entering learning state

[ 24.420000] bonding: Ethernet Channel Bonding Driver: v3.6.0 (Septe mber 26, 2009)

[ 24.430000] bonding: MII link monitoring set to 100 ms

[ 25.210000] br0: port 2(ath0) entering forwarding state

[ 25.270000] device eth0 entered promiscuous mode

[ 25.280000] ag7240_ring_free Freeing at 0x818cb800

[ 25.280000] ag7240_ring_free Freeing at 0x81b3f000

[ 25.310000] ag7240_ring_alloc Allocated 1280 at 0x81af1800

[ 25.310000] ag7240_ring_alloc Allocated 4032 at 0x81b3f000

[ 25.320000] Setting PHY...

[ 28.330000] device eth0 left promiscuous mode

/bin/sh: can't create /proc/sys/net/bridge/bridge-nf-call-arptables: n onexistent directory

/bin/sh: can't create /proc/sys/net/bridge/bridge-nf-call-ip6tables: n onexistent directory

/bin/sh: can't create /proc/sys/net/bridge/bridge-nf-call-iptables: no nexistent directory

ath9k radio on: phy-1 ath-1

/bin/sh: can't create /proc/sys/dev/wifi0/silent: nonexistent director y

nvram was changed, needs commit, waiting 10 sec.

[ 29.980000] etherip: Ethernet over IPv4 tunneling driver

connect: Network is unreachable

connect: Network is unreachable

connect: Network is unreachable

gethostbyname: Network is unreachable

DD-WRT v24-sp2 std (c) 2011 NewMedia-NET GmbH

Release: 10/31/11 (SVN revision: 17798)

DD-WRT login: root

Password:

==========================================================

____ ___ __ ______ _____ ____ _ _

| _ \| _ \ \ \ / / _ \_ _| __ _|___ \| || |

|| | || ||____\ \ /\ / /| |_) || | \ \ / / __) | || |_

||_| ||_||_____\ V V / | _ < | | \ V / / __/|__ _|

|___/|___/ \_/\_/ |_| \_\|_| \_/ |_____| |_|

DD-WRT v24-sp2

http://www.dd-wrt.com

==========================================================

Jan 1 00:02:37 login[1105]: root login on 'console'

BusyBox v1.19.2 (2011-10-31 04:16:23 CET) built-in shell (ash)

Enter 'help' for a list of built-in commands.

root@DD-WRT:~#

cpuinfo

root@DD-WRT:~# cat /proc/cpuinfo

system type : Atheros AR7240 rev 1.2 (0x00c2)

processor : 0

cpu model : MIPS 24Kc V7.4

BogoMIPS : 266.24

CPUClock : 400

wait instruction : yes

microsecond timers : yes

tlb_entries : 16

extra interrupt vector : yes

hardware watchpoint : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0ff8, 0x0ff8]

ASEs implemented : mips16

shadow register sets : 1

core : 0

VCED exceptions : not available

VCEI exceptions : not available

ifconfig

root@DD-WRT:~# ifconfig

ath0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:148 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:32

RX bytes:0 (0.0 B) TX bytes:21953 (21.4 KiB)

br0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX

inet addr:192.168.11.1 Bcast:192.168.11.255 Mask:255.255.255.0

UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1

RX packets:305 errors:0 dropped:0 overruns:0 frame:0

TX packets:18 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:38907 (37.9 KiB) TX bytes:5392 (5.2 KiB)

br0:0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX

inet addr:169.254.255.1 Bcast:169.254.255.255 Mask:255.255.0.0

UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1

eth0 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX

UP BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

eth1 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:310 errors:0 dropped:0 overruns:0 frame:0

TX packets:18 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:44863 (43.8 KiB) TX bytes:5476 (5.3 KiB)

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1

RX packets:6 errors:0 dropped:0 overruns:0 frame:0

TX packets:6 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:348 (348.0 B) TX bytes:348 (348.0 B)

mon.ath0 Link encap:UNSPEC HWaddr XX-XX-XX-XX-XX-XX-00-00-00-00-00-00-00-00-00-00

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:87 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:32

RX bytes:7080 (6.9 KiB) TX bytes:0 (0.0 B)

mtd

root@DD-WRT:~# cat /proc/mtd

dev: size erasesize name

mtd0: 00040000 00010000 "RedBoot"

mtd1: 003a0000 00010000 "linux"

mtd2: 002ce000 00010000 "rootfs"

mtd3: 00020000 00010000 "ddwrt"

mtd4: 00010000 00010000 "nvram"

mtd5: 00010000 00010000 "board_config"

mtd6: 00400000 00010000 "fullflash"

mtd7: 00040000 00010000 "fullboot"

ไฟล์ MTD